You are at:

CMA CGM Strauss

Name
CMA CGM Strauss
Accident date
19/02/2010
Location
Italy
Accident area
1.5 NM south of the port of Genoa-Voltri, Italy
Spill area
Offshore
Cause of spill
Collision
Nature of pollutant
HFO 500
Quantity spilled
180 tonnes
Ship / structure type
Container ship (5782 TEU)
Built date
2004
Length
277.28 m
Owner
CMA CGM

The incident

On Friday 19 February 2010, the Italian tug Francia was towing the container ship CMA CGM Strauss, 1.5 nautical miles south of the port of Genoa-Voltri (Italy). A collision between the two ships pierced a hole in one of the container ship’s bunker tanks, causing a spill of an estimated 180 tonnes of HFO 500.

Immediate response

The CMA CGM Strauss’ crew immediately took all the necessary measures to stop the oil spill, in particular by transferring the contents of the damaged tank into other bunker tanks and by causing the vessel to list. The fuel leak was therefore rapidly controlled and the CMA CGM Strauss and the Francia were able to return to dock safely.

The Italian authorities were rapidly alerted and provided specialised offshore spill response means. Despite these efforts, some of the oil slicks escaped and were pushed by the Ligurian current towards the French Côte d’Azur from 23 February. On the same day, the Italian authorities requested the activation of the Ramogepol (designed to coordinate spill response means), rapidly followed by the French authorities which, as a precaution, activated the ORSEC maritime contingency procedure. As the days went by, this extremely scattered pollution, spread over an extensive area, drifted off the coast of the Côte d’Azur, without presenting a major threat, as it was carried by a constant Ligurian current parallel to the coast and by strong winds pushing it offshore. The French area covered by aerial surveillance means and oil spill response vessels stretched from south of Nice to south of Cap Camarat.

Upon request by the French Mediterranean maritime authorities, an expert from Cedre joined the crisis unit set up. After discussion with Cedre's Emergency Response Department, the initially considered possibility of dispersing the HFO 500 was rapidly discarded by the French authorities.

 

The CMA CGM Strauss
The CMA CGM Strauss

 

Response at sea

 Foilex Skimmer was used onboard the Italian oil spill response vessel San Giacomo, from which it was directly placed on the patches of fresh oil. The Italian authorities announced that they had recovered around 140 m3 of products (seemingly an oil/water mixture). On the French coast, the Hiwax skimmer head onboard the oil spill response vessel (OSRV) Ailette was also used to directly pump patches measuring up to 2 metres in diameter. This “patch by patch” recovery strategy and use of the  Transrec 250 Hiwax version   enabled the collection of some of the patches of pollutant detected by aerial means. In order to improve recovery by concentrating slicks, the decision was made on 25 February to deploy 300 m of Aérazur 210 inflatable boom, towed between the Ailette and the private tug boat Laisse Dire III chartered by CMA CGM. The CMA CGM Strauss was repaired in the port of Genoa and became operational again on 27 February 2010 when it set sail for Asia.

The same day, two French Navy ships Chevreuil and Bélier conducted tarball recovery operations using scoop nets some twenty nautical miles offshore. The response effort was gradually phased out over the following days. On 5 March, the Mediterranean maritime authorities announced the deactivation of the ORSEC maritime procedure as well as of the crisis management unit.

 

Sheen around the CMA CGM Strauss
Sheen around the CMA CGM Strauss

 

Response techniques deployed

  • Mechanical mixing of slicks (or sheen)
  • Direct recovery of accumulations of pollutant using a self-adjusting Foilex weir skimmer by the Italians
  • Direct recovery of accumulations of pollutant using a Transrec 250 skimmer and Hiwax head (from the French Navy OSRV Ailette)
  • Deployment of 300 m of inflatable Aérazur 210 boom, towed between the Ailette and the Laisse Dire III, with recovery from the pocket formed by the boom using the Hiwax skimmer head
  • Manual recovery using scoop nets for a few clusters of floating tarballs located 15-20 NM offshore.
Last update: 02/05/2011